JustCarsForum - Your Ultimate Automotive Community

It is advisable to bleed the brakes anyway.Seize the opportunity to remove some of the old brake fluid as well.
To retract the piston, let the old brake fluid to escape via the bleed screw.

Authentic batteries are superior. To eliminate any uncertainty, it is essential to connect it to a Xentry machine for precise diagnostics.

It remains on the original turbo. I have possessed it since its acquisition. The turbo cartridge has excellent stability, with no discernible movement in the bearings. Ordered the five missing nuts and washers and reassembled it. I would consider acquiring another turbo, but I cannot identify any is...

Neither have I.

I possess a 2009 Vito 115 with 325,000 kilometres on it. I was driving when I suspected the exhaust manifold had failed. Upon returning home, I examined the turbo body and found that all five washers and bolts on the exhaust side were missing. The van was functioning properly prior to this issue. My...

Recently, I encountered the following trouble codes; nevertheless, I did not see any alterations when driving. P0123 "Throttle/accelerator pedal position sensor circuit A high voltage" P2112 "Throttle Actuator A Control System - Stagnant" I researched more and found on a forum th...

The initiative was categorised as a voluntary satisfaction campaign; if I recall correctly, the campaign may have been suspended at the time of your car purchase owing to complications.

You may verify here for any pending items

First generation C-HR The application's functionality is significantly constrained by the vehicle's installed hardware.


Has your C-HR undergone the DCM software update?

Thank you for the valuable information! I purchased another unit during the last incident but had not installed it before the system began functioning properly. I will install it in a few months if the issue has not resolved itself. I assume it is located inside the casing of the driver's mirror, an...